MT-EJS
MT-EJC
|
Model |
Voltage |
Frequency |
M. Flow |
M. Head |
Power |
Suction |
Pipe Diameter |
|
(V) |
(Hz) |
(m³/h) |
(m) |
(W) |
(m) |
(mm) |
|
|
MT-EJC-550 |
220V |
50/60Hz |
2.5 |
42 |
550 |
9.5 |
25 |
|
MT-EJC-750 |
220V |
50/60Hz |
3 |
48 |
750 |
9.5 |
25 |
|
MT-EJC-1000 |
220V |
50/60Hz |
3.6 |
52 |
1000 |
9.5 |
25 |
|
MT-EJS-550 |
220V |
50/60Hz |
3 |
38 |
550 |
9.5 |
25 |
|
MT-EJS-750 |
220V |
50/60Hz |
3.5 |
42 |
750 |
9.5 |
25 |
|
MT-EJS-1000 |
220V |
50/60Hz |
3.5 |
48 |
1000 |
9.5 |
25 |
|
Classical Type |
Fashion Type |
Honor enjoy type |
|
★ Automatic start and stop |
★ With all Function of Classical Type |
★ With all Function of Fashion Type |
|
★ Water shortage protection |
★ Mode switching Function: Solve complex water use environments Flow and pressure dual control mode； Set starting pressure and stopping pressure mode |
★ Overheat protection, Frost protection |
|
★ Sensor failure protection |
★ Timing function |
|
|
★ Rust protection |
★ Visual digital interaction |
★ Starting pressure will be adjusted automatically according to the current piping system pressure. |
|
★ Leakage protection |
★ Real-time pressure display |
|
|
★ Lightning protection |
★ Overvoltage protection |
★ Automatic shutdown for pipeline brust |
|
★ Automatic reset |
★ Starting pressure range can be precisely adjusted（0.5-6.0bar） |
★ LCD |
|
|
★ The starting pressure and stopping pressure are precisely adjustable: Staring Pressure: 0.5-6.0bar; Stopping Pressure: 1.0 -9.8 |
Selection: Internet Control |
|
|
|
Mode type |
Application recommendation |
Effect |
|
Flow Pressure double control mode |
1. Tap water boost, input water pressure unstable |
Avoid the pump does not start or start frequently. |
|
2. Water tower repenishment |
Avoid setting the pressure value too high, causing the explosion. |
|
|
3. Often easy to misuse |
Avoid misuse caused pump shutdown and improve pump utilization. |
|
|
4. Long distance horizontal water supply |
Avoid pump non-stop caused by reduced pump performance. |
|
|
Set starting pressure and stopping pressure mode |
1. When the water floor changes |
Improve pump utilization and save energy. |
|
2. Need to use pressure relief protection |
Avoid pipe bursts and cause property damage. |
|
|
3. Low floor wants to increase pressure |
Improve pump utilization and save energy. |
|
|
4. Increase pressure in a short time |
Reduce pump working time and save energy. |
